Fade-To-Black
Global Warming - my hydrogen on demand project theses...start date 9-11-'07 ....Power to the People.... In search of Arc Man 7-7-'07......The New Oklahoma land rush.... started on 6-16-'07
Today there are a number of viable ways to generate hydrogen efficiently. :
The Purdue aluminum gallium method ... + no moving parts just add water...instant hydrogen..... - aluminum oxide waste.... - added weight
The Cornish high voltage wire fed arc welder like method. Mr. Cornish could have possibly been a arc welder his own self...his bold move of having a point of ignition in the presence of hydrogen could be why others didn't pursue high voltage. Did the Cornish method.. generate any oxygen? Similar to the Kato sacrificial aluminum can project...ask Vic... it had much more drama.
The somewhat inefficient standard electrolysis method....heavy
current flow between
plates through water releases hydrogen.....all the older batteries had screw
caps over each cell with a small hole to let the hydrogen gas out or add
water....a small spark/Arc in the pin hole of the cap has caused batteries to
explode. Coriolis
force has a portal...from the East Indies to New Zeeland ...things
seem to be turning
intensely in the opposite direction...Dan the Man with the
Philippine Method ... NZ
Magic Water Motorcycle...Was the conditioned water
electrically charged? acidified? a dielectric? Did the magic water melt an oxide
exposing something like Al to H2O? did it convert to gas before during or after
the spark plug fired? Was firing the plug necessary? Could the container house the equivalent of dry
charged plates just waiting for water? If it became a battery did
connecting the leads together complete a circuit? Will highly charged water burn?
On 9/12 MSNBC Keith Olberman had a clip on burning water...just a teaser? Taser
the soup? On 9-13 CNBC Joe
-Cell
Man- Kernen states "we need to run cars on
water...cold fusion"...he's finally coming around....but there is always
the rentless pressure from the dark side.
Fade-To-Black
The U.S. hope... The Stan Meyer's method ...w/modest energy in and abundant oxygen and hydrogen out... Meyer's patent expired on 6-16-2007... the land rush is on...if his water injector worked what's holding it up? Why did his connections move everything to Canada?..--With the plasma is in a constant state of flux...with everything else in physical and electrical and magnetic resonance...makes it daammmm hard to hit a constantly moving target. There are a few advanced technical folks who have done it. Lawton's replication of Meyer's work the complete plans... schematics and circuit descriptions w/photos, videos and additional links...w/hints on brown scum pudding... my problem today...along with inedible chocolate cake when given time.
Enter - The Flux-Capacitor....it will generate hydrogen on demand....with oxygen ....that's even better.
A capacitor is one of the components of basic electronics.... The Ausi-Cap from Byron New Energy (charged, flammable water, balloon?, static) note the plates/tubes in the picture are in close proximity separated by a dielectric (a non conductor..air, water, various liquids, glass, mica, etc) any car battery could also be considered a capacitor...(ignition points and condenser ) in automotive jargon the word condenser is a misnomer...it is a capacitor. It has the capacity to store the energy that would have arced in the gap pitting the points (arc welding). Or can the Piezo electric effect (static discharge arc)...be used to accomplish anything?
As EMF moves current thru the plates a charge is building in the dielectric... but when EMF/voltage increases to the tipping point the dielectric breaks down and the energy in the water converts a portion to gas before recharging begins......(the typical capacitor would have failed in this situation).... this breakdown is what makes the Flux-Capacitor release some of its energy in the form of hydrogen and oxygen gas...in a energy efficient manner....
It is my hypothesis that adding a high voltage arc (like a spark plug Arc) will trigger the avalanche in the dielectric (water) and interrupt the normal fixed time constant.. (or explode, a bad thing ...only if outside the cylinder block)....providing it is still intact.... then electronically switch in a easily managed lower voltage and current at this precise time to add additional HHO generating efficiency by extending the useful portion of the this cycle...and keep from blowing up... Ala battery,...SCR,...or by adding a big standard electrolytic to keep the current flowing for just a tad?
GM's new Volt runs on magnetic flux throughout and this necessitates generating energy and storing energy. (e.g.) breaking...Can a fuel cell use HHO as fuel?...Why is one of Fords models called Fusion?.. Since the plasma is in a constant state of flux.....hence The Flux-Capacitor....The intake air aspirated with the HHO added is HOT AIR.....Fact!!...We can run our cars on Hot Air today. Ha Ha Ha
The heavy duty igniter I have in hand will use a 1.5 V double A cell to create the Flux for the 12 KV pulse... I have seen its arc jump a gap of about .20 in. in dry air...very painful... ....just like a cigarette lighter in the dark....to fire the bong or bang.
No, I am not Doc, but Marty the arc welder would like it if he tried it.....or will Aaron M. be Arc Man...join with us to save the planet from global warming and War for oil...We may have to harness the power of Lightening, as they say down under...don't ask how just hitch um up.
My Key learnings: 1. Increase the temperature of water with parabolic. 2. Maintain high Q by Moving the inductance into the plates 3. increasing vacuum 4. automatic freaquency shifting to stat atop the Q. 5. HV is too hard to handle.
New cheap hydrogen using sunlight conversion....beat me to the finish ...oh well
The End or The Beginning
Global Warming- my hydrogen on demand project ....Power to the People...In Search of... Marty.... 1st draft 8-8-7
Today there are a number of viable ways to generate hydrogen efficiently. :
The Purdue aluminum gallium method...no moving parts just add water...instant hydrogen. http://www.purdue.edu/UNS/x/2007b/070827WoodallNanotech.html
The Cornish high voltage wire fed arc welder like method. Mr. Cornish could have possibly been a arc welder...his bold move of having a point of ignition in the presence of hydrogen could be why others didn't pursue high voltage. 2http://keelynet.com/energy/cornish.htm...Did the Cornish method generate any oxygen?
The standard electrolysis method....current flow between two plates through water releases hydrogen.....all the Older batteries had screw caps over each cell with a small hole to let the hydrogen gas out or add water....a small spark in the hole of the cap has caused batteries to explode... link 3,4 New Zeeland car and Philippine car videos
Magic water motorcycle...Was the water acidified? Did the magic water melt an oxide exposing something like Al to H2O?
Enter - The Flux-Capacitor....it generates hydrogen on demand.
A capacitor is one of the components of basic electronics....two plates in proximity separated by a dielectric (a non conductor..air, water, various liquids, glass, mica, etc) any battery could be considered a capacitor...(ignition points and condenser ) in the automotive jargon the word condenser is a misnomer...it is a capacitor. It has the capacity to store the energy that would have jumped the gap pitting the points (arc welding). Can this be used like the piezo electric effect (static discharge)... to accomplish anything?
As EMF moves current thru the plates a charge is stored in the dielectric... but when EMF/voltage increases to point the dielectric breaks down and the energy in the water converts a portion to gas before recharging begins......(the typical capacitor would have failed in this situation).... this breakdown is what makes the Flux-Capacitor release some of its energy in the form of hydrogen and oxygen gas...in a relatively energy efficient manner. manner... http://video.google.com/videoplay?docid=-3463623904721705305&q=hydrogen+generation&total=50&start=0&num=10&so=0&type=search&plindex=0
It is my hypothesis that adding a high voltage arc (like a spark plug) will trigger the avalanche in the dielectric (water) to breakdown before the normal time constant..(or explode.. a bad thing..)....if still intact.... then electronically switch in a easily managed lower voltage and lower current pulse at the precise time to add additional hydrogen generating efficiency by extending the useful portion of the cycle..and keep from blowing up... ala SCR..
GM's new Volt runs on magnetic flux throughout and this necessitates generating and storing energy...hence The Flux-Capacitor....
What gives with the oil patch? Will the petro dollar decline continue? Can most of the older autos be retrofitted for hot air? Is there another advanced ceramic company besides Ceradine? Ford is around $7 are they ready for the HHO generator? Honda?
Global Warming hydrogen generator
Global Warming hydrogen generator
Global Warming hydrogen generator
Global Warming hydrogen generator
Global Warming hydrogen generator
Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor Flux-Capacitor